Products

Designed to allow for the quick and safe removal of drive shafts by connecting properly with the locking clip rings found on many front wheel drive...

Application:Volkswagen Go+C8 2009.Seat: Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013.Audi A3 2009/2013.Cont...

6PCs SAS Clutch Centering Alignment Tool For BMW ●SAC clutch mandrel kit for centring the clutch disc on the flywheel while installing the self adj...

Provides a safe and controlled method of adjusting the tensioner position during removal and installation of the auxiliary belt.Includes various ad...

Special tool set for pressing out and fitting compact wheel bearings on the rear axle without removing the axle knuckle and ABS sensor. Suitable fo...

Slide the powder-coated tool downward between the window exterior and the door. The channel side of the tool should face the door. When the tool ch...

Intermediate Lever Spring Removal Tool For B38 B48 ●Designed to safely remove and refit the intermediate shaft control springs used on the Variable...

Intermediate Lever Spring Removal Tool For BMW, Mini, Citroen, Peugeot   ●Designed to safely remove and refit the intermediate shaft control spring...

Special design to remove an install the intermediate shaft control springs used on VVT system found on BMW petrol engines.Applications include: BMW...

Prevents spindle from spinning when tightening or loosening wheel nut. Use appropriate socket on free end of tool to hold spindle. 6 different inte...

Swinging arm pivot nut toolApplication: Suzuki SV650/1000, Dl650/1000,V-Storm plus some Hayabusa, Bking and GSX-R750/1000/1100Material Chrome Vanad...

This tool kit has been designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the n...

For resetting the brake pistons on Iveco disk brakesSuitable for Iveco Stralis, Eurocargo, DailyIncludes the following tools:10 mm ratchet wrenchre...

For loosening and tightening the flywheel and crankshaft pulleySuitable for the following Ford models:Models: Ford C-MAX (2007-2017), S-MAX (2006-2...

Brake Drum Gauge 160 - 360 MM ●Developed to measure the wear limit on brake drums as well as the diameter of the drum and then establish the shoe p...

●For checking and adjusting the engine timing.●Contents:-Camshaft locking & adjusting tools, to be used as OEM 1860874000, 1860874000, 18609850...

Master Engine Timing Tool Set For Fiat, Alfa, Lancia, Opel, Suzuki, Ford ●For checking and adjusting the engine timing ●Suitable for the following ...

For checking and adjusting the engine timing Suitable for the following models:Audi 80, A1, A2, A3, S3, A4, A5, A6, TT, Q5Seat Arosa, Ibiza, Cordob...

Master Engine Timing Tool Set For Ford, VW, Seat, Mazda, Volvo  ●For checking and adjusting the engine timing ●Contents:-Camshaft adjusting tools, ...

It's designed for separate the suspension strut from wheel bearing housing. The internal expansion of the tool is powered by screws and its operati...

Made from POM material which is rigi and nono marking and ideal for use on aluminium panels.Contents: 1. Long Type Curved Dolly2. Curved Dolly3. Ut...

Four universal cone adaptors fit a wide range of vehiclesHand pump with gauge allows simple and easy controlled testingRelease pin allows depressur...

A large 9.0 Litre (2.35gallon) capacity.Manual fluid extractor , can be used to extract many kinds of non-explosive liquids.Completely using hand p...

Oil Dipstick For Audi ●Fits the following engines: AUDI A4/A5/A6 with engines 1.8 2.0 TFSI / 3.0, 3.2 FSI/ 2.0,2.7,3.0 TDI, among others●Applicable...

Oil Dipstick For Mercedes Truck ●Designed to measure the oil level of transmission.●Applicable: BENZ truck.●Spring length: 860mm

For outside and inside deburring of metal pipesSuitable for pipe internal diameter of 1/8 in to 1/2 in (3-12 mm) and pipe outside diameter of 5/32 ...

For repair of defective oxygen sensor threadsReamer Ø 18.6 mm, for reaming of oxygen sensor threadsTap M20 x 1.5, for cutting the repair bushing th...

For removing and installing of the drive shaft nutallows inserting of the rear differential pinon sealsuitable for BMW vehicles with rear and four ...

For removing and installing the front and rear crankshaft sealApplication: BMW N20/N40/N42/N45/N45T/N46/N46T/N52/N53/N54/N55OEM CODE: 11 9 220 11 ...

Designed to rotate crankshaft on Volvo commercial vehicles via flywheel ring gear.Application(s):  Volvo 6L & 12L.Engines: D9A, D12, D16C and F...

7pcs Air Impact Chisel Adaptor Set Ideal for Loosening Rusty Bolts and Components Chisels Have Different Profiles to Facilitate Dismantling and Pr...

Extra-long air impact drift set, allows the extraction of shafts, screws, etc. if stuck in deep holesFor use with Laser Air Hammerincludes the six ...

Using the special virbo chisel set turns every commercially available compressed sir chipping hammer to an ideal problem solver for opening rusted ...

Wide Application – For most diesel applications, brushes are specially engineered to fit injector seats.Great Function – Used to remove rust, carbo...

Universal Oil Filter Wrench 1/2" Drive  ●Designed to remove and install oil filters quickly and easily using the pull spring design.●Adjustment ran...

Universal Oil Filter Wrench 1/2" Drive 60-80 mm

Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compressi...

Suitable for all types of bulbs, including: Bayonet, screw & wedge based, and heated bulbsGently and firmly grips glass shell of bulb, for remo...

For adjusting the Camshaft drive belt tensioner.Applications: Seat Mii, Leon; Skoda Octavia, Citigo; Volkswagen Up; Golf V11; Audi A1, A3.OEM T1049...

Special angle jaws make it suitable for a variety of ring and flat band hose clamps.Capacity 0 - 50mm with extended length 430mm.Double jointed fea...

Special angle jaws make it suitable for a variety of ring and flat band hose clamps.Plastic dipped handles with 35 degree angled head for tight are...

Suitable for use on multi-valve petrol and diesel engines with deep-seated valves. Suitable also for general use on OHC, OHV and CVH engines. Unive...

A special boot clamp crimping pliers designed to work in confined spaces, allows you to work on large size boot clamps, top plate on pliers flatten...

Allows easy and damage-free assembly of piston ringsHandle made of profile steel, spring mechanismSuitable for piston ring diameter 60 to 120 mmLen...

Simply place under the drawbar and read the valueMaterial: aluminiumWeight scale from 50-100 kgTotal length: 430 mm, tube: diameter: 37 mmFor carav...

For installing and removing the VANOS adjuster.Applicable: BMW B38, B48, B58 engine.BM number: 2450487.Size: 1/2”Dr x 22mm / 16PT.Cr-Mo

4pcs Camshaft Adjuster.Used to mark pulse wheel on removed camshaft.OEM Ref.: 278 589 00 23 00Application: Mercedes Benz M152, M276, M278

Special tool for changing the timing chain and setting the timing on Mercedes 1.3 M 242.914 Petrol and Renault 1.3LH5H engines.Designed to allow th...