Bearing Tools

Bearing Separator Set2 Sizes : 50 and 75mm4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head125mm Puller Cross-Bar with 160mm Forcing Screw

Universal Press and Pull Sleeve KitPress Sleeves from 34 - 80mm Diameter in 2mm stepsOutside Diameter from 44 - 90mm in 2mm steps5 x Pulling Spindl...

Replacement M18 Pulling Spindlefor Universal Press and Pull Sleeve Kit CT2934

Replacement M16 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Replacement M14 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

Replacement M12 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

450MM X M14 SPINDLE TO FIT CT3187

Wheel Hub Bearing Unit Tool KitConsists of parts from 4 kits for62 / 66 / 72 / 85mm VAG applicationsCT3872 62mm Kit - Audi A2 | VW Lupo / FrontCT42...

450MM X M12 SPINDLE TO FIT CT3187

Blind Hole Bearing Extractor Set - 16pc Puller and Slide-HammerScrew Adaptors - M6 x 1.0 / M8 x 1.25 / M10 x 1.5Collets - 8 - 11mm / 12 - 17mm / 18...

9pc Bearing Puller SetRemoves gears / pulleys and steering wheels.Drop forged / heat treated steel attachments.3lb x 390mm slide hammer with T-hand...

Replacement M10 Pulling Spindlefor Universal Press and Pull Sleeve Kits CT2934 or CT3757

31pc Wheel Hub and Bearing Service Tool SetAllows disassembly and assembly of the wheel hub and wheel bearings.Pressure plates -50 | 55 | 59 | 63.3...

26pc Universal Press and Pull Sleeve KitFor the removal and installation of bushes / bearings and seals etc.Fully universal applications on both ca...

Small Insert Bearing Puller KitFor the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.Adjus...

The CT3526 is a 9-piece dent puller slide hammer set composed of a 5lb slide hammer with a finger grip handle for enhanced grip, a metal pulling sc...

450MM X M16 SPINDLE TO FIT CT3187

450MM X M10 SPINDLE TO FIT CT3187

●Drop forged●Clamping width (A): min.46 mm / max. 230 mm●Puller bolt receiving thread (B): 3/4" x 10 UNC●Clamping bolt distance (C): 224 mm●Clampin...

Hydraulic Wheel Hub Puller - 10 TonHydraulic Ram with 10 Ton capacity used to press the axle shaft from the hub.For 4 or 5 bolt hubs with the centr...

4.3kg slide hammer for wheel hubs / front-wheel drive shafts and brake drumsSuitable for VW / Audi / Alfa Romeo / Ford / Citroen / BMW / Mazda / FI...

21pc Wheel Bearing and Seal Installation KitSuitable for mounting bearings and sealing rings.Particularly useful when used with a hydraulic pres...

10 Ton Hydraulic Ram Ball Joint Hub Gear Bearing Puller Tool KitSuitable for pulling hubs / flanges / gears and bearings.The screw mechanism conver...

5pc Bearing Puller SetBearing extractor collets with internal capacity from 11 to 32mm Collets : 10 - 14mm | 15 - 19mm | 18 - 25mm | 25 - 32mm3/8 -...

Universal Bearing Packer111mm Cone Diameter.Suitable for packing bearings with an even spread of Grease.A Clean and Quick method - place bearing on...

17pc Bearing and Bushing Driver SetFor Bearings / Vibration Isolators / Silent Blocks3 Driver Handles : 113mm | 140mm | 162mm14 adaptors : ID 10 - ...

●For removal and installation of various bearings, ball bearings and seals, from Ø18 to Ø60 mm for wide application.●Powered by a hydraulic cylinde...

Gear Puller - 3 Jaw8in. / 200mmReversible Legs

Universal Puller Set2 Leg / 3 SizesVariable WidthChrome MolybdenumLegs - 100 / 200 / 250mm Long

For removing of inner wheel bearing rings on wheel hubsthe bearing rings usually remain on the wheel hubs when disassembling the wheel bearingClamp...

Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach. Ball-end tips fit inside bearing rac...