neilsen

INNER: 105MM; OUTER: 125MM; H: 180MMSTUD:116.5mm; STUD WIDTH: 9.8mmInternal square drive to DIN 3121 /ISO 1174 .Rigid Locating tube.High accuracy o...

INNER: 80MM; OUTER: 95MM; H: 175MM; STUD:87mm; STUD WIDTH: 10mmLOCATING TUBE: 49MMInternal square drive to DIN 3121/ISO 1174.Rigid locating tube.Op...

Designed to remove the wheel axle with outer thread on BPW.Use with 43mm and 30mm  wrench.

Crankshaft Rotater For Mercedes-Benz ●Allows the engine crank to be manually adjusted.●Allows pinpoint accuracy calibration.●Adjusting screw in the...

Best tool for replacing MAN tractor hub bearings and removing the old bearings essential tool.Turn the screw and remove the old bearing.European tr...

To install front wheel hub of MAN.There is a bearing inside the tool to save power.Use this axle with spanner spin the screw.Robust Execution.Very ...

Certain stop through ring shaped bearing areaUse with 32mm wrench.Applicable: HALDEX ●Allows tightly brake linkage adjusters to be pulled off.●Ring...

With 3/4“ square drive to DIN 3121 / ISO 1174 Special profile with 8 external studs Positive drive of the axle nut Any extensive slipping is avoide...

 The tool removes and installs diesel injected nozzle. The bottom four comers. Europe truck repair tool. 24MM, 4 teeth, inner 22.2mm, outer 32mm, 8...

Special 6 teeth designed to remove the differential rear nut.Made from special steel for high tightening and loosening torque.Applicable: MAN, Merc...

Special designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm wrenchApplicable: For former model of 16 tons truck.

Designed for accurate rotating of the engine for •valve setting or other maintenance and service work.Use with 1/2” drive wrench.Ocerall length: 61...

Designed to remove the wheel axle with outer thread on BPW.Use with 49mm and 30mm  wrench.Applicable: for former model of 16 tons truckOuter diamet...

Designed to rotate the crankshaft when correct the timing of engine. Use with 1/2” drive wrench. Applicable: SCANIA after 1996 Improve engine perfo...

  This product, CT6341 - Engine Crank Alignment DAF, is designed to work with a 1/2" drive wrench. It is suitable for use with XF105, Euro5, and ot...

This 1/2"DR electromagnetic injection valve cap socket is designed for both tightening and loosening. With a 38mm inner diameter and 45mm outer dia...

Efficiently and safely install the transmission oil seal for SCANIA transmission flange shafts on both the transmission and rear axle with our Simm...

This calliper adjuster socket features a unique five-tooth design that allows for precise adjustments of brake calipers. It has a 24mm hex drive an...

Made from special steel and robust execution to remove the axle nut.Use with an impact wrench or torque wrench, drive with 32/46 mm wrench.Forward ...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work position

Practical connector system with fixing screw.Useful for different groove socket nutsEnables stable work positionPrevents slippage of the socketChan...

Trucks Injectors Adaptor ● Special designed set for testing leaks in heavy goods vehicles(HGV) cooling system●Adaptors have quick-release couplings...

Off-center mounted cone that spins on an axis to make sure it uniformly shapes the tubeMade of high quality steel alloy.Arc frame ergonomic yoke de...

 3PCS 1-1/8" Hones For CT2756 3pcs honesMaterial: CarborundumHone size:18*6mm  220 GritReplacement hones for above CT2756  

4" Engine Cylinder Hone Honing Tools 50-180mm ●Cleans and de-glazes cylinders of carbon deposits quickly and effectively.●Suitable for all cylinder...

4" Hones For CT6352 Material: CarborundumHone size:100*11mm 220 Grit Replacement hones for  CT6352

Funnel fits to oil filler neck.No unsafe spills on engine or floor.Transparent tube displays oil flow.Hands-free working.Pliers opening can self ad...

Extracts petrol injectors easily without damaging the injector or head. For removing Bosch GDI injectors on all standard Ford EcoBoost petrol engin...

Suitable for extracting burnt in copper sealing washers from the injector shaftUniversal usage for BMW, Mercedes-Benz, PSA modelsHelps to avoid dam...

For removing of inner wheel bearing rings on wheel hubsthe bearing rings usually remain on the wheel hubs when disassembling the wheel bearingClamp...

Ribbed Belt tensioner | for Mercedes-Benz W169 & W245for tensioning and loosening the damper spring personalprevents damage to the tensioner el...

Brake Bleed Catch Bottle Kit ●Simple to Use●Everything needed to quickly bleed brakes with no mess●Plastic bottle collects discharged fluid●Three s...

Use to plug steel lines once disconnected. Prevents fluid leaks and contamination during service Use with any automotive fluid Spring loaded des...

Application: Compatible with Ford Focus DCT Dual Clutch Transmission DPS6Function: Reuse a Dual Clutch Assembly that has been removed/previously in...

Application:Citroen: Relay/Jumper (01-02), Relay/Jumper II (02-06)Fiat: Croma (86-97), Ducato (86-06), Talento (87-94)Iveco: Daily (91-06), Turbo D...

From 2011 the fuel pump sprockets no longer have threaded holes fitted in them, this tool allows the pump removal without removing the timing chain...

Special bit sockets for assembly and disassembly of plastic oil drain screw on plastic oil sumpsExternal hexagon driveWith internal square driveWit...

Specifically designed to aid the removal of seized Injectors.To be used in collaboration with Air Vibration Hammers.Allows effective transmission o...

Wheel Hub Removal Tool For Seized Hubs ●It's specially designed to assist in the easy removal of seized wheel hub with ease.●Covers most cars &...

DCT wet clutch oil seal fitting kit for Ford and Volvo. Includes the seal guide and cover press, used for the fitting of the clutch cover without d...

Adas Park Assist Camera Positioner For Volvo XC60 S80 S60 V90 V60 ●It's designed to ensure the correct position of the front facing parking assista...

 Front Facing Radar Sensor Positioning Tool For ADAS On Volvo ●It's designed to ensure the correct position of the front facing radar sensor on Vol...

Designed to removes the low pressure fuel Line that supplies the high pressure fuel pump.Fits the following mini cooper s models with the N14 or N1...

Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs and Stratton, Clinton, Harley-Davidson, etc.For springs 3/4 inches to 1-1/16 inc...

For quick and accurate alignment of the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment.Widely u...

This torque multiplier set allows the correct mounting position and correct tightening sequence to be applied to the crankshaft pulley bolts.The to...

Wheel Bearing Circlip Removal & Assembly Lever Tool ●Specially designed lever that allows the easy removal and fitting of wheel bearing interna...